Ironworker : FERRIC Kingsland Compact 60 (Single Operator) *NEW*

Ironworker : Kingsland Compact 60 (Single Operator) *NEW*

Kingsland MULTI 80 Ironworker


Single operator, five station machine.

  • Capacity : 60 US Short tons
    Punching capacity: 1 1/8″ in 5/8″ plate or 1 1/2″ in 7/16″ plate
    Angle cutting: 4 3/4″ x 4 3/4″ x 1/2″
    Flat bar cutting: 8″ x 3/4″ – 12″ x 5/8″
  • One operator, five station machine
  • Punching, notching, angle, flat bar & section shear, rectangular notcher
  • Large working tables on all stations
  • Hold downs on all shear stations
  • Adjustable stroke control on all station
  • Standard 45 Degree Mitre cutting on angle station
  • Front part from punch table removable to get tight to web of angle to punch
  • Standard 39”  ruled backstop for shear stations
  • Protection guards on all stations
  • Central greasing system
  • Full oil tank
  •  Voltage : 575V/3 ph. / 60 Hz or Single phase 220V
  • F.O.B Cambridge, ON & Lethbridge, AB


Technical Specifications

PunchingMaximum Capacity (mm)30×15
Diameter x Thickness (mm)38×12
Stroke Length (mm)55
Standard Throat Depth (mm)220
Largest Hole (standard)38
Largest Hole (optional)110
Maximum Section160
Working Height (mm)940
SHEARINGFlat Bar – Max thickness (mm)200×20
Flat Bar- Max width (mm)300×15
Angle Flange Trim80×10
Working Height (mm)940
ANGLE CUTTING90° cut120×12
45° mitre max 45°80×8
Working Height (mm)1140
SECTION CUTTINGRound / Square40/35
Channel / Beam102×51
NOTCHINGMaterial Thickness (mm)10
Width – Rectangular (mm)42
Depth – Rectangular (mm)100
Depth – Vee (mm)60
Angle flange100×10
Working Height (mm)940
CORNER NOTCHMaximum Capacity150×4
TUBE NOTCHMaximum Diameter (mm)60
BENDINGSheet Bending (max capacity)150×5
Bar Bending on Notch End150×12
Maximum Capacity20×12
Net Weight (Kg)1265
Gross Weight (Kg)1385
Machine Dimensions (LxWxH, cm)152x59x170
Packed dimensions (LxWxH, cm)166x77x190