Ironworker : FERRIC Kingsland Multi 60 Ironworker (Dual Operator) NEW

Kingsland MULTI 60 Ironworker

Capacity : 60 US Short tons
Punching capacity: 1 3/16″ in 5/8″ plate or 2 1/4″ in 5/16″ plate
Angle cutting: 5 x5 x 1/2″
Flat bar cutting: 9″ x 3/4″ – 14 3/4″ x 3/8″
Punching, notching, angle, flat bar & section shear, rectangular notcher
Large working tables on all stations
Hold downs on all shear stations
Adjustable stroke control on all station
Standard 45 Degree Mitre cutting on angle station
Front part from punch table removable to get tight to web of angle to punch
Standard 39” touch & cut ruled backstop for shear stations
Protection guards on all stations
Central greasing system
Full oil tank
Voltage : 575V/3 ph. / 60 Hz
F.O.B Cambridge, ON & Lethbridge, AB

Punching	Maximum Capacity	1 1/4 x 1/2
	Diameter x Thickness	2 1/4 x 5/16
	Stroke Length	2 1/8
	Standard Throat Depth	12
	Deep Throat Model	25
	Largest Hole – Std. Equipment	2 1/4
	Largest Hole (Optional)	6 3/8
	Maximum Section	12
	Working Height	40 1/2
Shearing	Flat Bar – Maximum Thickness	9 x 3/4
	Flat Bar – Maximum Width	14 3/4 x 3/8
	Angle Flange Trim – Max. 45°	4 x 5/8
	Working Height	35
Angle Cutting	90° Cut	5 3/16 x 1/2
	45° Mitre (true int./ext.)	2 3/4 x 3/8
	Working Height	44 1/2
Section Cutting	Round/Square	1 3/4
	Channel/Beam (*) ()	5 3/16 x 2 1/2
	Tee (*) ()	3 1/2 x 1/2
Notching	Material Thickness	3/8
	Width – Rectangle	1 3/4
	Depth – Rectangle	3 1/2
	Depth – Vee (*)	2 3/8
	Angle Flange – Maximum Profile	4 x 3/8
	Working Height	35
Corner Notch (*)	Maximum Capacity	10 sq x 5/64
Tube Notch (*)	Maximum Outside Diameter	3 1/4
Bending (*)	Maximum Capacity (Bar Bend)	10 x 1/2
	Maximum Capacity (Sheet Bend)	24 x 1/4
Punching at Notching Station	Throat Depth	5
	Maximum Capacity	1 1/2 x 1/4
Technical Data	Motorpower (HP)	7,5
	Net Weight – Standard Throat (lbs)	3,462
	Gross Weight – Standard Throat (lbs)	3,737
	Machine Dimensions (L x W x H) (“)	65 x 28 x 72
	Packed Dimensions (L x W x H) (“)	69 x 34 x 79