Menu
Used – Good Condition
Punches & dies included
View full list of specifications below
Punching
| Rated capacity | 125 Short tons |
| Max. Capacities | 2 1/8” hole in 5/8” |
| Diameter x thickness | 2 axes (X-R) |
| Maximum stroke length | 3 1/8” |
| Speed over ¾” travel | 48 (24 cycles) |
| Largest hole to be punched | 9” |
| Maximum section flange punch | 12” |
| Standard throat depth | 24” |
| Working height | 41 ½” |
Shearing
| Flat bar | 15” x 1” |
| Alternatively | 24” x 5/8” |
| Blade length | 24” |
| Angle flange trim | 5” leg x 5/8” |
| Working height | 35 3/8” |
Angle Cutting
| At 90 Degrees | 6” x 6” x ¾” |
| At 45 Degrees | 3” x 3” x 3/8” |
| Working height | 45 5/8” |
Section Cutting
| Round or square bar | 2 1/8” |
| Channel / I beam | 4” x 8” |
| Tee | 5” x ½” |
Notching
| Material thickness | ½” |
| Width | 2 3/8” |
| Depth Vee – Rect. | 3 1/8” – 4” |
| Angle flange | 4” x ½” |
| Working height | 35 3/8” |
Dimensions
| Motor + voltage | 10 HP – 575V/3ph/60Hz |
| Approx. weight | 7,385 Lb |
| Machine dimensions | 74” x 31” x 78” |
10 Natura Way
Cambridge, ON N3C 0G7